Derniers sujets
Qui est en ligne ?
Il y a en tout 1 utilisateur en ligne :: 0 Enregistré, 0 Invisible et 1 Invité Aucun
Le record du nombre d'utilisateurs en ligne est de 29 le Mer 25 Fév 2015 - 14:01
Connexion
Statistiques
Nous avons 243 membres enregistrésL'utilisateur enregistré le plus récent est paul225l
Nos membres ont posté un total de 8922 messages dans 811 sujets
Euphoric avec Dosbox
+2
maximus
kenneth
6 participants
Forum Oric :: Forums :: Forum Public :: Emulations
Page 1 sur 1
Euphoric avec Dosbox
Bonsoir,
je voudrais utiliser Euphoric avec Dosbox mais impossible de démarrer Euphoric.
je pense avoir bien configuré Dosbox et au lancement de Euphoric j'ai ce message !!
le fichier Rom est pourtant bien a sa place ??
et voilà le fichier .Ini de Euphoric
avez vous une idée du problème.
merci.
je voudrais utiliser Euphoric avec Dosbox mais impossible de démarrer Euphoric.
je pense avoir bien configuré Dosbox et au lancement de Euphoric j'ai ce message !!
le fichier Rom est pourtant bien a sa place ??
et voilà le fichier .Ini de Euphoric
- Spoiler:
- ;; Euphoric.ini : this file sets Euphoric's configuration
;;
;; Comment-lines start with character ';'
;; (don't worry if you see two ';' characters, it is just in case you remove one :-)
;; Settings are in the form Keyword=value, without any space.
;; Be aware that keywords (and values) are case-sensitive !!
;; Options that expect a Yes/No value are checked against the first letter only,
;; and only 'n' and 'N' are checked, so you can write the value in a few languages:
;; (No, no, non, nein... Yes, si, oui, ja... will give the intended action)
;; It is highly recommended to set the following 3 options to the paths of your roms, tapes and disks :
;; Euphoric won't start if it doesn't find the roms !
RomPath=c:\Euphoric\roms
TapePath=c:\Euphoric\tapes
DiskPath=c:\Euphoric\disks
;; this option selects the type of Oric to run
;; Oric1,Atmos,Telestrat (and even Stratos for UK fans)
;; You don't need to change it because it is overriden by command line options -1 or -t
;; and the provided Windows shortcuts use the right command line options
Computer=Atmos
;; this option selects the type of cpu (6502 or 65C02).
;; Genuine Orics have an old 6502 (NMos). Modern 65C02 (CMos) have an extended instruction set.
Cpu=6502
;; this option selects the frequency of the cpu, leave it to 1.0 MHz unless you know.
Clock=1.0 MHz
;; The following option selects the type of floppy disc controller,
;; it applies to Oric1 & Atmos only.
;; Acceptable values: None,Microdisc,Jasmin,Apple
;; (Apple means the Apple interface as found on Pravetz clones)
;; You usually don't need to change this option because it is overriden by command line options -d and -j,
;; or when you double click on a disk image, or when you use the Windows shortcuts.
DiskController=None
;; Select which floppy drives you want to have
DriveA=Yes
DriveB=Yes
DriveC=No
DriveD=No
;; Uncomment to emulate an IDE interface and specify a hard disk image file.
;; This is a preliminary support of the much expected Oric IDE interface:
;; if works in virtual life but the real implementation still has electrical problems.
;; Only one DOS supports it for now: have a look to RanDOS 2002.
;IDEDisk=\docume~1\fabrice\mesdoc~1\Micro\Oric\Euphoric\disks\hd
;; The following option sets the name of the rom that will be loaded when you start an Oric-1
Oric1Rom=Basic10.rom
;; The followinf option sets the name of the rom that will be loaded when you start an Atmos
;; Genuine Orics have a US keyboard, with few discrepancies.
;; Localized roms are available if you don't want to get a US keyboard.
;; Use Bas11_de.rom for a Deutsch keyboard
;; Bas11_fr.rom for a French keyboard
;; Bas11_uk.rom for a British keyboard
;; Bas11_es.rom for a Spanish keyboard
;; Bas11_se.rom for a Swedish keyboard...
;; or any rom you like (e.g pravetzd.rom)
AtmosRom=Basic11b.rom
;; the rom in the line below will be used inside the Microdisc controller
;; Use Cumana.rom for a Cumana 1 system
MicrodiscEprom=Microdis.rom
;; the rom in the line below will be used inside the Jasmin controller
JasminEprom=Jasmin.rom
;; the rom in the line below will be used inside the Apple interface
AppleInterfaceEprom=eprom8d.rom
;; The following roms set the contents of telestrat banks 1 to 7.
;; A localized Tmon24fr.rom is available for French keyboards
;; Unused banks are available as ram instead.
Bank7=Telmon24.rom
Bank6=HyperBas.rom
Bank5=TeleAss.rom
Bank3=Telmatic.rom
;; This option affects the contents of ram at startup,
;; Try 1 or 2 to get the initial screen you are used to.
RamPattern=1
;; This option allows to emulate a printer on the Oric centronics port
;; (don't forget to switch the virtual printer ON in the environment screen
;; before printing (or using F3), since it is off when starting the emulator)
Printer=Yes
;; Here you tell in which file goes the printer output
;; Use PrinterOutput=lpt1: for direct printing
PrinterOutput=printer.txt
;; Yes to add a serial extension to the Oric1/Atmos (Telestrat always has it)
AsynchronousController=No
;; Specify the real serial port to use
;; None,com1,com2
SerialPort=None
;; Use this option in some cases, e.g when connecting a Minitel
CarrierAlwaysDetected=Yes
;; Yes to add a Real Time Clock extension
RealTimeClock=No
;; Yes to emulate a joystick on Telestrat joystick port
JoystickPort=No
;; Yes to emulate a telestrat mouse in a joystick port
Mouse=No
;; This option specifies the type of joystick interface on an Oric1 or Atmos
;; None, PASE, IJK
Joystick=None
;; Yes to add a light pen extension
LightPen=No
;; Yes to wire pin PB5 of the VIA to A14 on a 32KB rom
SelectRomWithPB5=No
;; selects the name of the dump file (snapshot of the oric state)
;; generated when pressing F9
DumpFile=Dump
;; Yes if you want a Log file (log.txt)
;; useful if you have problems starting Euphoric
Log=No
;; Yes to dump the PSG registers at every VIA's timer1 interrupt
;; (there are players that can play this dump file)
DumpSound=Yes
;; Here you tell where goes the previous sound dump
SoundFile=dump.psg
;; Yes if you have a monochrome VGA monitor
MonochromeVGA=No
;; This option allows you to select a mode (Q) with a pixel aspect that is closer to the real thing
;; (Oric pixels are a bit flat). This is only true if you have a CRT monitor: AFAIK, LCD pixels are always square.
;; X is a default mode (320x240 unchained VGA mode) that should always work
;; Try VGAMode=Q (256x256 chained VGA mode) with next option ScanLines=Yes, and see if it works on your monitor.
VGAMode=X
;; If Mode Q works on your monitor, you might wish to get an even better screen aspect, with less 'boxy' pixels.
;; VGA monitors use an horizontal frequency that is about two times the one used on Oric monitors, and thus vertical
;; resolution is doubled. With the default value of this option (ScanLines=Yes), each line is displayed twice.
;; If you select ScanLines=No, each line will be displayed only once and there will be a small gap between the lines.
;; As a result, you will get pixels that have a more natural shape, but beware that this is not accepted by all monitors.
ScanLines=Yes
;; This option allows to tweak the VGA frequencies in Mode Q
;; Try 0,1,2 or 3 if you have display problems, 0 is the normal value.
;; I'm not sure it has a drastic effect, though...
VgaFrequency=0
;; you may redefine keyboard translation here
;; provide all 8 PC keys (PC scancode values in decimal) for an Oric Matrix Row
;; use negative numbers for extended PC scancodes (i.e prefixed by 0xE0)
;; and an illegal value for no scancode (eg. 128 or 999).
;; Don't use these options to get a WYTIWYG (What You Type Is What You Get) behavior
;; with your keyboard : if you don't have a US keyboard, use a nationalized rom as
;; explained in the AtmosRom option.
;; Advanced users can use these options to get the Ctrl key in place of the CAPS one,
;; like on the real Oric keyboards.
;; Don't change these options if you don't know how...
KbdMatrixRow0= 8, 36, 50, 37, 57, 22, 21, 9 ;
KbdMatrixRow1= 49, 20, 7, 10, 51, 23, 35, 38 ;
KbdMatrixRow2= 6, 19, 48, 39, 52, 24, 34, 11 ;
KbdMatrixRow3= 47, 33, 5, 12,-72, 25, 18, 53 ;
KbdMatrixRow4=-29,999, 29,999, 42, 56,-56, 54 ;
KbdMatrixRow5= 2, 1, 44, 86,-75, 14, 30, 28 ;
KbdMatrixRow6= 45, 16, 3, 43,-80, 27, 31, 58 ;
KbdMatrixRow7= 4, 32, 46, 40,-77, 26, 17, 13 ;
avez vous une idée du problème.
merci.
Invité- Invité
Re: Euphoric avec Dosbox
Bonsoir Danynou
Apparemment le dossier Euphoric est déclaré comme disque dur principal dans l environnement Dosbox
Dans la configuration il est demandé de chercher la rom dans le sous dossier Euphoric.. alors qu'on y est déja !
je pense que dans les cheminements programmés (Euphoric/Roms Euphoric/tapes etc) dans la config de Euphoric il faut enlever "Euphoric"
A bientot
Apparemment le dossier Euphoric est déclaré comme disque dur principal dans l environnement Dosbox
Dans la configuration il est demandé de chercher la rom dans le sous dossier Euphoric.. alors qu'on y est déja !
je pense que dans les cheminements programmés (Euphoric/Roms Euphoric/tapes etc) dans la config de Euphoric il faut enlever "Euphoric"
A bientot
kenneth- Modérateur
- Messages : 879
Date d'inscription : 13/01/2013
Age : 56
Localisation : 63
Re: Euphoric avec Dosbox
Je te recopie le petit tuto de Dbug du site oricgames:
utiliser DosBox + Euphoric | |||
- Recopiez Euphoric - Pour automatiser le début: rendez vous dans le dossier Dosbox qui est su C:\Program files\Dosbox ouvrez le fichier de configuration: dosbox0.74.conf et tout en bas rajoutez dans le dossier autoexec: | Rajoutez à la fin:
| ||
Re: Euphoric avec Dosbox
Bonjour et merci à vous deux.
j'ai modifié le fichier autoexec et enlevé euphoric évidemment c'est évident, désolé... faut pas vieillir
et superbe ça marche.
je préfère me servir de mon Atmos mais de temps en temps je me met sur le pc pour tester les programmes.
j'ai modifié le fichier autoexec et enlevé euphoric évidemment c'est évident, désolé... faut pas vieillir
et superbe ça marche.
je préfère me servir de mon Atmos mais de temps en temps je me met sur le pc pour tester les programmes.
Invité- Invité
Debian 8 dosbox et euphoric
Salut,
Juste que cela fonctionne hyper bien, quelques lignes dans les fichiers ini ou conf, comme d'habitude, mais l'atmos est bien la.
Mon interrogation maintenant c'est euphoric et tcpip..... Il y a t il moyen ?
Je redécouvre, j'ai pas encore eplucher le net, je devrais avoir une vraie machine dans les 10 jours.
J'ai pas perdu la main a zorgons revenge !!!
Cordialement
Juste que cela fonctionne hyper bien, quelques lignes dans les fichiers ini ou conf, comme d'habitude, mais l'atmos est bien la.
Mon interrogation maintenant c'est euphoric et tcpip..... Il y a t il moyen ?
Je redécouvre, j'ai pas encore eplucher le net, je devrais avoir une vraie machine dans les 10 jours.
J'ai pas perdu la main a zorgons revenge !!!
Cordialement
karnajh- Messages : 6
Date d'inscription : 06/05/2017
Age : 57
Localisation : manche
Re: Euphoric avec Dosbox
J'ai fini par me lancer Laisser tomber mon très vieux portable sous XP pour faire tourner Euphoric pour tenter de le faire tourner sur mon (vieux) portable sous Vista et DOSBOX 0.74...
Ça marche presque impec, sauf que, si j'ai bien un clavier AZERTY , les touches situées à la droite de la rangée des chiffres et de la 3ème rangée ne répondent pas. J'ai essayé plusieurs claviers (celui du portable et un extérieur) avec le même résultat.
Impossible de taper + ou = (un peu gênant pour programmer...)
Impossible de taper % ou ù
De plus seul le Shift de gauche est actif, le shift droit est sans effet.
Et pour finir il y le comportement bizarre de la touche MAj qui soit n'agit pas (lors d'une cession ) soit agit mais seulement au second appuis (lors d'une autre cession..)
J'ai pourtant bien la ligne suivante dans la fenêtre de status de DOSBOX
DOS keyboard layout with main language code FR for layout fr
J'ai tenté plusieurs ID de claviers dans dosbox-0.74.conf ... Sans plus de succès
Ceci est un appel à l'aide et Il est l'heure d'aller dormir...
Ça marche presque impec, sauf que, si j'ai bien un clavier AZERTY , les touches situées à la droite de la rangée des chiffres et de la 3ème rangée ne répondent pas. J'ai essayé plusieurs claviers (celui du portable et un extérieur) avec le même résultat.
Impossible de taper + ou = (un peu gênant pour programmer...)
Impossible de taper % ou ù
De plus seul le Shift de gauche est actif, le shift droit est sans effet.
Et pour finir il y le comportement bizarre de la touche MAj qui soit n'agit pas (lors d'une cession ) soit agit mais seulement au second appuis (lors d'une autre cession..)
J'ai pourtant bien la ligne suivante dans la fenêtre de status de DOSBOX
DOS keyboard layout with main language code FR for layout fr
J'ai tenté plusieurs ID de claviers dans dosbox-0.74.conf ... Sans plus de succès
Ceci est un appel à l'aide et Il est l'heure d'aller dormir...
Dom50- Messages : 916
Date d'inscription : 06/12/2012
Localisation : Normandie
Re: Euphoric avec Dosbox
Je ne vais hélas pas pouvoir t'aider, étant habitué depuis toujours à utiliser Euphoric avec la ROM d'origine, et donc en clavier QWERTY...
Je suspecte quelques chose entre la ROM modifiée et la config du clavier sous MS-DOS... Je creuserais d'abord sur les pb de config clavier français sous MS-DOS à ta place.
Je suspecte quelques chose entre la ROM modifiée et la config du clavier sous MS-DOS... Je creuserais d'abord sur les pb de config clavier français sous MS-DOS à ta place.
Symoon- Messages : 779
Date d'inscription : 26/04/2014
Re: Euphoric avec Dosbox
@Dom50
Bonjour. Si le PC a un port USB, peut-être le montage Clavier Oric vers USB (cf dernier CEO-MAG) pourrait apporter une solution ?
Bonjour. Si le PC a un port USB, peut-être le montage Clavier Oric vers USB (cf dernier CEO-MAG) pourrait apporter une solution ?
Voyageur- Messages : 254
Date d'inscription : 30/11/2017
Age : 69
Localisation : SYDNEY, AUSTRALIE
Re: Euphoric avec Dosbox
Merci pour vos réponses
L'astuce, trouvée sur un forum, a consisté , non à désinstaller ce clavier, mais à lui affecter un driver différent. Ainsi Vista ET DosBox sont contents tous les deux
Peut-être effectivement, mais le fer à souder et moi, ça fait vraiment deux ....voyageur a écrit:Bonjour. Si le PC a un port USB, peut-être le montage Clavier Oric vers USB (cf dernier CEO-MAG) pourrait apporter une solution ?
C'est ce que j'ai fait. Il existe quantité de forums où les gens ont le même problème que moi. J’ai fini par trouver mon bonheur sur l'un d'eux, après avoir cru réussir dans un premier temps en désinstallant un des 4 claviers que Vista installe d'office. Ca marchait, mais Vista régulièrement, réinstallait ce maudit clavier sans qu'on lui demande riensymoon a écrit:Je creuserais d'abord sur les pb de config clavier français sous MS-DOS à ta place.
L'astuce, trouvée sur un forum, a consisté , non à désinstaller ce clavier, mais à lui affecter un driver différent. Ainsi Vista ET DosBox sont contents tous les deux
Dom50- Messages : 916
Date d'inscription : 06/12/2012
Localisation : Normandie
Forum Oric :: Forums :: Forum Public :: Emulations
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|
Dim 31 Mar 2024 - 14:35 par kenneth
» Bla Bla général du Jury
Jeu 21 Mar 2024 - 8:51 par Dom50
» carte mère Oric (re)tracée
Mar 5 Mar 2024 - 18:54 par kenneth
» Meurtre à Grande Vitesse
Dim 25 Fév 2024 - 5:09 par Iurius
» ORIC-1 sur LE BON COIN
Ven 23 Fév 2024 - 23:01 par Mcar
» ORIC ATMOS sur LE BON COIN
Dim 4 Fév 2024 - 12:06 par kiwilevrai
» Problème d'affichage des couleurs avec un Oric Atmos
Sam 27 Jan 2024 - 1:26 par pierbail
» Bienvenue dans le Forum des Oriciens
Mar 9 Jan 2024 - 12:33 par Dom50
» Rencontre avec Laurant Weill, co-fondateur de Loriciel, et mon garçon de 12 ans
Ven 29 Déc 2023 - 14:13 par Arcade-des-Monts
» Bonnes fêtes
Mar 26 Déc 2023 - 10:21 par Dom50
» Murders in Venice / Meutres à Venise
Sam 18 Nov 2023 - 22:44 par retroric
» Un clavier PS/2 pour tester un ORIC
Dim 27 Aoû 2023 - 9:49 par Voyageur
» Disquette 3" Sedoric
Mar 1 Aoû 2023 - 14:22 par AtomeX
» faire un 6502 avec des phototransistor
Dim 16 Juil 2023 - 17:26 par Voyageur
» Oricutron linux et DSK
Jeu 29 Juin 2023 - 18:34 par Voyageur